- whatsapp +51955515985
- support@ecuforcetruck.com
- 24/7 Customer Support
Menu
Shop
Account
Subtotal: $0.00
No products in the cart.
Circuit Description
The aftertreatment system is monitored by temperature sensors that are located in the exhaust system. The aftertreatment diesel oxidation catalyst intake temperature sensor is located after the turbocharger outlet. The aftertreatment diesel particulate filter intake temperature sensor is located between the aftertreatment catalyst and the aftertreatment particulate filter. The aftertreatment diesel particulate filter outlet temperature sensor is located after the aftertreatment particulate filter. These sensors monitor the temperatures in the aftertreatment system and determine if the aftertreatment catalyst is missing.
Component Location
The aftertreatment catalyst is located in the exhaust system. The location of the catalyst can vary depending on the original equipment manufacturer (OEM). Refer to the OEM service manual.
Conditions for Running the Diagnostics
This diagnostic runs when the aftertreatment system is being actively regenerated to reduce soot in the aftertreatment diesel particulate filter. The diagnostic checks for a temperature increase across the catalyst during an active regeneration of the aftertreatment system to detect the presence of the catalyst.
Conditions for Setting the Fault Codes
The electronic control module (ECM) detects that the aftertreatment diesel oxidation catalyst intake temperature sensor and the aftertreatment diesel particulate filter intake temperature sensor are reading the same temperature during an active regeneration of the aftertreatment system.
Action Taken When the Fault Code is Active
The ECM illuminates the amber CHECK ENGINE lamp and/or Malfunction Indicator Lamp (MIL) immediately when the diagnostic runs and fails on two consecutive trips.
Active and stationary regeneration of the diesel particulate filter will be disabled.
The EGR valve will be closed.
Engine torque will be reduced if the engine is operated for an extended period of time with this fault active.
Conditions for Clearing the Fault Code
To validate the repair, perform INSITE? electronic service tool Aftertreatment Diesel Particulate Filter Regeneration Test.
The fault code status displayed by INSITE? electronic service tool will change to INACTIVE immediately after the diagnostic runs and passes.
The ECM will turn off the amber CHECK ENGINE lamp after the diagnostic runs and passes.
For OBD engines, the ECM will turn off the MIL after 3 consecutive trips where the diagnostic runs and passes.
The ?Reset All Faults? command in INSITE? electronic service tool can be used to clear active and inactive faults, as well as the MIL for OBD applications
Shop Talk
This fault code becomes active when the aftertreatment diesel oxidation catalyst intake and aftertreatment diesel particulate filter intake temperature sensors do not detect the presence of a catalyst in the aftertreatment system.
Possible causes of this fault code include:
Tampering with the catalyst system
Removing the catalyst system from the vehicle
A damaged catalyst.
The type of diesel exhaust fluid tank temperature and level sensor used can vary depending on the vehicle OEM. As a result, the physical and/or electrical sensor configuration may vary slightly from what is shown in the troubleshooting and wiring diagram information.
Reference the appropriate OEM wiring diagram when troubleshooting circuits that utilize wiring supplied by the OEM.
For intermittent power supply and datalink communication issues with Aftertreatment Components, it is highly recommended that the OEM Power Distribution Center fuses and relays be thoroughly checked for loose, missing or intermittent connections.
Possible Cause:
1) Aftertreatment Injector failure
2) ECM calibration
Related
Categories Cumminz, DTC TRUCKS, ISX15 CM2250 (2010-12)Tags 1664, 2010-12, 31, 380, 4796, Aftertreatment, Catalyst, CM2250, Code, Condition, Cummins, Diesel, Exists, Fault, FMI, ISX15, Missing-, oxidation, PID, SID, SPN
Wiring Diagrams
Component Locators
John Deere$120.00
Rated 0 out of 5
- Meritor Wabco Tool Box 12.9.1
Trucks software$35.00
Rated 0 out of 5
- Nexiq eTechnician 1.3.62 2020 etechnician software
NEXIQ$50.00
Rated 0 out of 5
- NEXIQ eTechnician 2.1.7657.26963 + Patch 2020
Allison$60.00
Rated 0 out of 5
NISSAN UD$100.00
Rated 0 out of 5
- Navkal 2018 offline version remove DPF MAXXFORCE 13 EPA 10
Navistar$80.00
Rated 0 out of 5
- Perkins EST 2022A ( 1 PC )
Perkins$86.00
Rated 0 out of 5
- Allison DOC 2019 PC software + GEN5 2019 truck
Allison$40.00
Rated 0 out of 5
- download Hitachi Construction Machinery MPDr Ver 3.7.0.0 [10.2020] Diagnostic Software
Hitachi$76.00
Rated 0 out of 5
- VOLVO PTT TECH TOOL 2.8.220 2023 Last version 1pc
Trucks software$200.00
Rated 0 out of 5
- volvo delete files 2023 33,46 GB
Trucks software$300.00
Rated 0 out of 5
- Detroit Diesel Diagnostic Link DDDL 8.0 PRO PROFESSIONAL Software trucks
Detroit$25.00
Rated 0 out of 5
- CATERPILLAR FLASH FILE 2021 74 GB ( Collection 2021 ) sofware trucks
CAT$55.00
Rated 0 out of 5
- VOLVO PROSIS 2023 ( 11.2022 )
Trucks software$96.00
Rated 0 out of 5
- Detroit Diesel Drumroll Engineering 7.06 DDDE v7.06
Detroit$20.00
Rated 0 out of 5
- Magic Tuner [paccar, Maxxforce, Detroit, Caterpillar, Delete]
Magic Tuner$50.00
Rated 0 out of 5
- DAF Davie Runtime v5.6.1 Davie XDc ll [02.2019] + Expire Fix 302.00 Unlock ( Windows 7 )
DAF$70.00
Rated 0 out of 5
- Volvo Premium Tech Tool PTT 2.8.130 Diagnostic Software 04.2022 ACPI ( 1 PC )
Trucks software$143.00
Rated 0 out of 5
- HINO EPC 2018 TRUCKS / BUSES 2018 EPC PARTS CATALOG
Hino$85.00
Rated 0 out of 5
- Cat Factory Password Generator 1.0 2019 WINDOWS 10
CAT$55.00
Rated 0 out of 5
Related products
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
- PACCAR PX-9 CM2350 (2013-17) Fault Code:3634 PID: SPN:5484 FMI:4 Engine Fan Clutch 2 Control Circuit – Voltage Below Normal or Shorted to Low Source
DTC TRUCKS
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
- MANUAL SERVICE DEUTZ AGROPLUS 75-85-95-100
DEUTZ$23.00
Rated 0 out of 5
- SERVICE MANUAL VOLVO D13 (2009)
TRUCK MANUALS$25.00
Rated 0 out of 5
- SERVICE MANUAL BOBCAT 5600 SMS
BOBCAT$62.00
Rated 0 out of 5
- SERVICE MANUAL DETROIT DD5
DETROIT$50.00
Rated 0 out of 5
- SERVICE MANUAL DDEC VI Troubleshooting Guide – MBE4000 6SE568
DETROIT$40.00
Rated 0 out of 5
- SERVICE MANUAL Bendix ABS GEN 4 AND GEN 5
BENDIX$12.00
Rated 0 out of 5
FUSO$27.00
Rated 0 out of 5
- MANUAL SERVICE DEUTZ AGROKID 30-40-50
DEUTZ$20.00
Rated 0 out of 5
- SERVICE MANUAL DETROIT DIESEL DDDL 7 U
DETROIT$20.00
Rated 0 out of 5
- MANUAL SERVICE DEUTZ AGROTRON TTV 1130-1145-1160 Mtr. 2000
DEUTZ$35.00
Rated 0 out of 5