Altec Bucket Truck Hydraulic Schematics (2024)

1. Introduction to Hydraulic Systems - Altec Inc

  • This course is intended to provide an understanding of the most important hydraulic concepts used on Altec products. The course begins with basic hydraulic ...

  • Basic Training Package Two-day course, (16 hours)

2. Technical Information - Altec Inc

  • As part of this effort, we are working to get technical manuals online to make them easy to access anytime you need them. We hope you find what you are looking ...

  • Thank you very much for being an Altec customer. At Altec, we make every effort to make your relationship with us simple and straightforward.  As part of this effort, we are working to get technical manuals online to make them easy to access anytime you need them.  We hope you find what you are looking for and if you have any questions or need more information, please call 1-877-GO ALTEC (877-462-5832).  We look forward to hearing from  you soon.

3. Altec Connect

  • Electrical and hydraulic schematics; Operator and maintenance manuals; Parts pages and schematics. Replacement Parts. Validate part usage per specific unit BOM ...


5. [PDF] Derrick Controls Adjustment Procedure

  • Disengage the hydraulic system and shut off the engine. Move the outriggers and tools/derrick control to the Derrick position. 2. Remove the turntable cover ...

6. Bucket truck hydraulic tool circuit issue - Arborist Forum

  • Dec 7, 2020 · My hydraulic tool circuit in the bucket isnt working. when I flip knob to engage tool (basket controls)there is a whining noise coming from ...

  • My hydraulic tool circuit in the bucket isnt working. when I flip knob to engage tool (basket controls)there is a whining noise coming from outrigger/dump valve.?.?.? Everything else operates as it should, with the exception of basket controls seem a bit slower then the pedestal controls...

7. [PDF] Altec, Inc.

  • Mar 28, 2022 · . As Built Electrical and Hydraulic Schematics to be Included In the Manual Pouch (Deps. 024). 1. Page 9. Quote Number: 1109764 - 1. Altec, Inc.

8. Viewing a thread - Too many safeties on bucket truck.(how to bypass)

9. problem with hydraulics on bucket truck | Page 2 - Arborist Forum

  • Oct 23, 2006 · Got system up and running now had a missing o-ring in purge valve and rebuilt outriggers. Works great except Altec boom tag said 54 ft work ...

  • Repair Altec AA500 bucket truch I do not know much about hydrolics on bucket trucks. I have a problem with the boom on 1986 Chevy c60 bucket truck. The outiggers work but the boom will not raise. The hydrolic is making a thumping noise when it tries to build up with pressure. The outriggers...

10. Boom Truck Blues for Your Amusem*nt - Forum

  • Apr 22, 2021 · The boom on Shakala is moved by hydraulic rams powered by a hydraulic pump which is powered by an Onan gas engine. This gas engine has an ...

  • More of a meandering whine than anything else, but describing my problem may garner some amusing ideas I haven't considered as a fix. Might even make me think through the problem. I have this van with a boom on it, or if you prefer, a bucket. We name most of our vehicles, even if its only for the...

11. [PDF] Calibration and Diagnostics Instrument (CADI) Quick Reference ...

  • manual, contact Altec technical support at 1-877-GO-. Altec option 4 for further ... winch, hydraulic tool circuit, and reel drive motor by following the ...

12. [PDF] Operator's Manual

  • contact with another energized source or a grounded object can cause the hydraulic fluid at the boom-tip to burn or explode. These are among the reasons aerial ...

13. Boom Truck troubleshooting | irate4x4

  • Sep 1, 2022 · So first, before trying to move the boom, are the outriggers all down? Are the controls in the bucket electric? Or do they have hydraulic lines ...

  • I bought a 1980s Ford F800 bucket truck, figured it would be handy around the property. Has some 400-500 cu in gas engine, 5&4 trans, hydraulic brakes. Pretty much the worst combo for a 10 wheeler...

Altec Bucket Truck Hydraulic Schematics (2024)


Are bucket trucks hydraulic? ›

At its core, a bucket truck is simply a utility truck fitted with a hydraulic pole (boom) that has a man-carrying bucket at its end. The bucket helps keeps the worker safe as the boom lifts him up to where he can comfortably use his tools and safely perform his job.

What does Altec stand for? ›

Altec may refer to: Altec Lansing, an American audio electronics company. Aerospace Logistics Technology Engineering Company (ALTEC), an Italian center for engineering and logistics services. Latin American Alliance for Civic Technology (ALTEC), founded in part by Omidyar Network.

How many gallons of hydraulic fluid does a bucket truck hold? ›

HYDRAULIC OIL RESERVOIR – A 35 gallon (132 l) hydraulic oil reservoir is built integral to the pedestal. The reservoir includes an anti-splash baffle and sight gauge for quick hydraulic fluid level checks, and a return filter pressure gauge.

What is the hydraulic pressure on an Altec bucket truck? ›

Hydraulic system: Open center (full pressure), maximum flow 6 GPM, maximum operating pressure 3,000.

What kind of hydraulic fluid do I use in my bucket truck? ›

Bio-Ultimax 1500 Dielectric Hydraulic Fluids for bucket trucks, scissor lifts, and more. They perform well in low- and high-pressure hydraulic systems that require Anti-Wear (AW), anti-rust, anti-oxidation, anti-foam, and demulisibility properties.

What stabilizes a bucket truck? ›

Fortunately, most modern standard-production commercial equipment is equipped with safety outriggers. They work to securely stabilize the truck while the boom is in operation.

Who owns Altec? ›

Altec is a third-generation family-owned business founded by Lee Styslinger in 1929. Lee Styslinger, Jr.

How much is Altec worth? ›

Altec's revenue is $3.5 billion.

Altec's annual revenue is $3.5B. Zippia's data science team found the following key financial metrics about Altec after extensive research and analysis. Altec peak revenue was $3.5B in 2023. Altec has 1,550 employees, and the revenue per employee ratio is $2,258,065.

How many miles per gallon does a bucket truck get? ›

The bucket truck has a replacement cost of $125,000 and should last 15 years. It should cost roughly $8,000 per year to maintain, be billed a minimum of 1,000 hours per year, accumulate 15,000 miles per year and get about 5 miles per gallon.

What hydraulic fluid is blue? ›

Kendall® Hyken Glacial Blu Hydraulic Fluid is a high-quality, low-viscosity, anti-wear hydraulic oil specially developed for use in industrial and mobile equipment operating at extremely low temperatures. It has a very high viscosity index and a low pour point for use in arctic conditions.

How full should a hydraulic reservoir be? ›

For a conventional reservoir used in open circuits the general rule is a tank oil capacity of 3 to 5 times the flow of the pump(s) per minute plus a 10 percent air cushion. For HFC and HFD fire-resistant fluids the general rule is 5 to 8 times pump flow per minute.

How do you increase the pressure in a hydraulic pump? ›

If you want to increase the hydraulic pump pressure in your system, there are a few things you can do. First, you can increase the fluid flow rate into the pump. This will increase the pressure on the fluid, and therefore increase the output pressure of the pump. Second, you can increase the displacement of the pump.

How do I know if my hydraulic pump is weak? ›

The way to avoid total system failure is by monitoring your pumps and looking for the following warning signs.
  1. Interior Leaks. Liquids should remain in the tubes that were designed for them. ...
  2. Exterior Leaks. ...
  3. Heat Degradation. ...
  4. Water Contamination. ...
  5. Failing Seals. ...
  6. Slow Performance.
Jan 13, 2020

What psi do hydraulics run at? ›

Hydraulic pressure is the amount of force applied to a liquid or gas by a pump. It is measured in pounds per square inch (PSI). Normal hydraulic pressure is between 3000 and 4000 psi. Hydraulic pressure is used in a variety of applications, such as irrigation, mining, oil drilling, and manufacturing.

Is a dump truck hydraulic or pneumatic? ›

Today, virtually all dump trucks operate by hydraulics and they come in a variety of configurations each designed to accomplish a specific task in the construction material supply chain.

Do garbage trucks have hydraulics? ›

Garbage trucks heavily rely on hydraulic equipment to load and transport waste.

Are most bucket trucks automatic? ›

Transmission Type

While automatic gearboxes are standard in all bucket trucks, manual transmissions are also available. Manual transmission allows operators more control over movement in difficult areas.

Top Articles
Latest Posts
Article information

Author: Dan Stracke

Last Updated:

Views: 6496

Rating: 4.2 / 5 (43 voted)

Reviews: 82% of readers found this page helpful

Author information

Name: Dan Stracke

Birthday: 1992-08-25

Address: 2253 Brown Springs, East Alla, OH 38634-0309

Phone: +398735162064

Job: Investor Government Associate

Hobby: Shopping, LARPing, Scrapbooking, Surfing, Slacklining, Dance, Glassblowing

Introduction: My name is Dan Stracke, I am a homely, gleaming, glamorous, inquisitive, homely, gorgeous, light person who loves writing and wants to share my knowledge and understanding with you.